Know what every job makes — before it's over.

Mitqor runs your crews, time clock, estimates, invoices, materials and payroll in one place — and shows the profit on every job while the work is still happening.

No credit card needed. We'll show you Mitqor running on a real job. Prefer to read first? Get the info pack (PDF).

See it in action

Click around — this is really how it works

Not a video, not a screenshot. Ten real parts of the system, fully clickable — jobs, estimates, time clock, materials, payroll, invoices, subcontractors, the client portal, training and closeout reports. All example data below; click a tab, click a job, click a button.

mitqor.app

Jobs

3 open

Roof replacement

Maple Ridge Condos · Hamilton office

On track

Basement finish

24 Birchwood Ave · Barrie office

In progress

Storm damage — emergency

Cedarview Plaza · Hamilton office

Dispatched

↑ Click any job to open it

Materials used

    Photos

    Daily log

      Time clock

      2 clocked in
      Marcus Webb · Roof replacement since 7:02 AM
      Priya Nandan · Basement finish since 7:45 AM

      Your shift

      Materials & inventory

      1 low stock

      Shingles — architectural

      Hamilton office · 140 bundles in stock

      OK

      Drywall sheets — 1/2"

      Barrie office · 6 sheets in stock

      Low stock

      Air movers (equipment)

      Hamilton office · 4 on hand

      OK

      Payroll — this week

      Draft
      Marcus Webb · 38.5 hrs × $32.00 $1,232.00
      Priya Nandan · 41.0 hrs × $29.50 + 1.0 hr OT $1,253.75
      Connor Boyd · 36.0 hrs × $27.00 $972.00
      Total payroll $3,457.75

      INV-1047 · Roof replacement Sent
      Tear-off & disposal$3,100.00
      Shingles, underlayment & labour$12,380.00
      Total$16,480.00

      EST-0042 · Kitchen remodel Sent
      Demolition & disposal$2,400.00
      Cabinets, counters & install$18,900.00
      Total$21,300.00

      No job exists yet. The client hasn't said yes.

      Subcontractors

      3 on the roster

      Northside Electric

      Rough-in · agreed $4,800 · insurance valid to Mar 2027

      Insured

      Ridgeline Flashing

      Roof flashing · agreed $2,200 · insurance expires in 12 days

      Expiring

      A-1 Drywall Crew

      Boarding & taping · insurance expired

      Expired

      What your client sees after signing in with an emailed link

      Kitchen remodel

      42 Oakridge Dr.

      In progress

      Photos shared with you

      Estimate EST-0043 · Bathroom update

      $9,850.00 · waiting for your answer

      Sent

      They never see your costs, your crew or anyone else's job.

      Training & compliance

      1 pending

      Ladder & fall protection

      Assigned to all roofing crew · Priya N. signed Oct 3, 8:12 AM

      Acknowledged

      Site safety orientation

      Assigned to new hires · Connor B. signed Oct 5, 7:30 AM

      Acknowledged

      WHMIS refresher

      Assigned to Marcus W. · not yet reviewed

      Pending

      Closeout report

      Roof replacement
      Hours logged212.5 hrs · 4 crew
      Materials used32 bundles · 6 rolls
      Photos (before / during / after)38
      Revenue − costs$16,480.00 − $9,777.75 = $6,702.25

      Live job profit

      Profit isn't a surprise at the end. You watch it happen.

      Every hour the crew clocks, every bundle of shingles, every receipt and every subcontractor lands on the job as it happens — so you see a job drifting over budget while there's still time to fix it.

      • Estimate accepted
      • Crew clocks in
      • Materials and receipts
      • Subcontractors assigned
      • Profit, always current

      Roof replacement

      Maple Ridge Condos · Hamilton office
      In progress
      Revenue · estimate accepted$16,480.00
      Labor · 3 crew-$3,457.75
      Materials & receipts-$4,120.00
      Subcontractor · flashing-$2,200.00
      Profit so far$6,702.25
      How it fits together

      One job. Everything connected.

      Every part of Mitqor feeds the same job, so nothing is typed twice, nothing is lost, and the profit is always right.

      Every job Crew & time clock QR, kiosk, PIN Estimates & invoices Quote, job, paid Subcontractors Agreed cost, insurance Materials Stock and usage Photos & logs Shared with client Payroll Overtime, bonuses Client portal Status and approvals Closeout report One printable PDF
      • Crew & time clockQR, kiosk, PIN
      • Estimates & invoicesQuote, job, paid
      • SubcontractorsAgreed cost, insurance
      • MaterialsStock and usage
      • Photos & logsShared with client
      • PayrollOvertime, bonuses
      • Client portalStatus and approvals
      • Closeout reportOne printable PDF
      What's inside

      From the first quote to the last payment

      The parts your clients, your subs and your crew actually use — all feeding the same job, on a phone or at a desk.

      Estimates & invoices

      Quote before a job even exists. When the client says yes — by phone, by email link or in their portal — the job is created for you. One click turns it into an invoice, and payments land on the job's profit.

      • Line-item estimates on your letterhead
      • Accept by phone, link or portal
      • Invoice and payments in one place

      Client portal

      Clients sign in with an emailed link — no password to forget — and see their own job: status, the photos you chose to share, and their estimates and invoices.

      • Accept or decline estimates online
      • You choose which photos they see
      • Costs and crew stay private; switch access off in one click

      Subcontractors

      Every outside trade on one roster, with insurance and WCB dates that turn amber, then red — so nobody uninsured shows up on site. Their agreed amount counts toward job cost from the moment you assign them.

      • Insurance and WCB expiry warnings
      • Assignment email in one click
      • Payments recorded against the job

      Training & compliance

      Upload safety documents, assign them to people or roles, and collect a recorded acknowledgment. If you ever need to prove a worker was trained, the timestamped record is already there.

      • Assign to a person or a whole role
      • Timestamped sign-off, searchable
      • See who is still pending at a glance

      Photos & closeout reports

      Crews upload before, during and after photos from their phone's browser. When the job closes, Mitqor builds one clean PDF — details, hours, materials and every photo — and shows what the job really earned.

      • No separate app for photos
      • One printable closeout report
      • Revenue, costs and profit on every past job

      Materials & inventory

      Stock lists per office, materials logged against the job that used them, and low stock flagged before it's discovered on site. Material cost flows into the job automatically.

      • Per-office stock, one company view
      • Low-stock alerts and reorder notes
      • Material cost lands on the job
      What changes once it's running

      Not just digital paperwork

      Four things that are genuinely different from how most crews run today.

      Payroll runs itself

      Hours flow straight from the time clock into payroll — nobody retypes a timesheet, ever.

      No training needed

      Crews scan a QR code and enter a 6-character code. That's the entire learning curve.

      Job profit, instantly

      The moment a job closes, you know exactly what it earned — not three weeks later in a spreadsheet.

      Every office, one view

      Running two or three locations? One dashboard, one payroll, one balance sheet — combined automatically.

      "I couldn't find software that actually worked the way a construction company runs, so I built it for my own crews first — then made it available to other companies."
      Flori Hoxha — Founder, Mitqor
      1 Platform for jobs, crews & the office
      2FA Two-step sign-in & activity log
      Multi Location support, one combined P&L
      QR Crew time clock, no app install
      Everything in one place

      Stop juggling five different tools

      Mitqor covers the whole job lifecycle — from the first estimate to the closeout report — so your team stops re-entering the same information everywhere. Below is exactly what's included; nothing here is a paid add-on.

      Explore the whole product →

      Jobs & scheduling

      Create a job with a client, address, budget and notes, then assign crew members to it — each worker sees only the jobs they're scheduled for. A dispatch-style schedule shows who's assigned where on any given day, and job status moves through open, in-progress and closed so nothing falls through the cracks. In a multi-office company, jobs are automatically tagged to the right location so the whole team isn't picking through jobs that aren't theirs.

      QR crew time clock

      Post a QR code at each job site or office; workers scan it with any phone camera and clock in or out in seconds — no app install, no company login required on shared devices. A kiosk mode also supports a short numeric PIN per employee for a shared tablet in a van or trailer. Every clock-in and clock-out is tied to the specific job it happened on, so hours roll straight into both payroll and job-cost reporting automatically — no manual timesheets to re-key.

      Payroll & overtime

      Mitqor totals hours per employee per pay period straight from clock data, applies daily and weekly overtime thresholds, and supports per-employee rate overrides for leads or specialty trades. Regional overtime rules can be configured to match where your crews actually work, so you're not manually recalculating hours in a spreadsheet before running payroll.

      Estimates & invoicing

      Quote first, job later: build a line-item estimate on your own letterhead before a job even exists. When the client says yes - by phone, by a link in your email, or in their own portal - the job is created automatically and your manager fills in crew and schedule. Convert the accepted estimate to an invoice in one click, record payments as they arrive, and every dollar flows into that job's cost-and-profit card.

      Subcontractors

      Keep every outside trade on one roster with insurance and WCB expiry dates that turn amber, then red, so nobody uninsured ever shows up on a site. Assign a sub to a job with a scope and an agreed amount, send them a ready-written assignment email in one click, and record what you've paid them. Their agreed amount counts toward the job's cost the moment they're assigned, so profit is never overstated while bills are still coming.

      Client portal

      Turn "how's my job going?" phone calls into a login. Clients sign in with an emailed link - no password to forget - and see only their own job: its status, the photos you chose to share, and their estimates and invoices, with Accept and Decline buttons on anything you've sent. They never see your costs, your crew or another client's job, and you can switch their access off in one click.

      Materials & inventory

      Keep a stock list per office, log materials as they're used on a specific job, and see the running material cost tied to that job automatically. When stock is running low it's visible immediately instead of discovered at the job site. Across multiple offices, inventory stays separated by location but still rolls up into one company-wide view for reordering decisions.

      Photo documentation & closeout reports

      Crews upload before/during/after photos straight from their phone's browser — no separate app. When a job closes, Mitqor generates a clean, downloadable closeout PDF combining job details, materials used, hours logged, and every photo — the kind of record you can hand to a client, a property manager or an insurer without assembling it by hand.

      Multi-location, one P&L

      Running more than one office or region? Add a location and every job, employee and inventory item can be tagged to it. Filter the whole app down to a single office when you need to, or view the combined dashboard, payroll and balance sheet across every location at once — one true picture of the company even if it's operating out of two or three cities under one roof.

      Training & compliance

      Upload training documents and safety materials, assign them to specific employees or roles, and collect a recorded acknowledgment when they've reviewed it. Every assignment and completion is timestamped and searchable, so if you ever need to prove a worker was trained on a procedure, the record is already there instead of buried in email.

      Vehicles & fleet assignment

      Keep a roster of company vehicles with make, model, colour, license plate and VIN, then assign a vehicle to an employee's profile in one click. Anyone looking at an employee — dispatch, the office, another supervisor — instantly sees which vehicle they're driving, with the plate and VIN right there, without a phone call to the field. Reassigning a vehicle to someone else, or retiring one from the active fleet, is a two-second change that updates everywhere it's shown. Want GPS tracking on top of this? See the fleet tracking add-on below.

      Roles & permissions

      Every employee gets exactly the access their job needs. Crew members see their own jobs and time clock. Supervisors (Operations) manage schedules, employees and vehicles for day-to-day running. Inventory managers control materials and stock. A Project Manager role sees nearly everything an admin sees — jobs, payroll, invoicing, HR, vehicles — with the balance sheet, activity log and website leads held back for the owner's eyes only. Only the main admin can grant or change anyone's role, and admin accounts have final say over every setting in the company.

      Built-in security

      Two-step verification on admin accounts, automatic sign-out after a configurable period of inactivity, and a full activity log recording who changed what and when — so sensitive job, payroll and client data stays protected. Every employee can change their own sign-in password at any time from their account page, and the main admin can reset anyone's password directly or send them a secure reset link if they're ever locked out.

      Getting started

      Up and running in days, not months

      No lengthy onboarding project. We set up your company, offices and team, and your crew starts using it on the next job.

      1

      We set up your company

      Tell us your offices, your team, and how you run jobs today. We configure Mitqor to match — no blank slate to fill in yourself.

      2

      Your crew starts clocking in

      Print a QR code for each job site. Workers scan it to clock in and out from day one — no app download, no training required.

      3

      The office runs everything else

      Estimates, invoices, payroll and job tracking all flow from the same data your crew is already logging in the field.

      Security

      Your job and payroll data, protected properly

      Mitqor is built on the same security practices as much larger platforms — because construction companies handle real money and real people's information too.

      Two-step verification
      Configurable auto sign-out
      Full activity log
      Role-based access
      Data isolated per company
      Optional add-ons

      Add what your company does beyond the everyday

      Every Mitqor plan covers jobs, crews, estimates, invoices and payroll. When you need more, these modules plug straight into the same jobs and the same profit numbers.

      Fleet tracking add-on

      On top of the vehicle roster and assignment built into every plan, the fleet add-on tracks where each vehicle actually goes, matches trips to scheduled jobs, and shows a live map of your fleet in motion — so vehicle time and travel becomes part of your operational picture, not just a name on a plate.

      • GPS trip tracking matched against scheduled stops
      • A live map of every vehicle in your fleet
      • Configurable cost-allocation rules for shared vehicles

      Priced separately from your core Mitqor plan. Ask about it when you request a demo.

      Emergency Response — restoration documentation and invoicing

      Floods, fires and urgent call-outs don't wait for a schedule. This add-on documents the whole emergency as it happens, then turns it into an invoice and an insurer-ready report when you close it.

      • Open it in a minute. Type of loss, location, who called, source of the loss. Your crew sees it on their home screen and clocks in straight away, with no scheduling.
      • A response timeline you can prove. Call received, crew dispatched, crew arrived, work completed, with the elapsed times worked out for you.
      • Equipment tracked by the day. Place dehumidifiers and air movers room by room, set the planned days, and see "day 2 of 3" and the charge as it builds up.
      • A drying log. Moisture readings by room and date, kept with the job.
      • Insurance details in one place. Insurer, claim and policy numbers, adjuster contact, date of loss.
      • Close it in one click. Equipment rentals end, a draft invoice with the equipment charges is created, and the job moves to Past with its profit.
      • A closure report for the adjuster. Timeline, crew hours, equipment, drying log and photos, ready to attach to your Xactimate submission. Printed without your internal costs or profit.

      Available on request. Priced separately from your core Mitqor plan. Ask about it when you request a demo.

      Pricing

      Straightforward pricing, sized to your company

      Every construction company is different — offices, crew size, and what you need on day one all vary. We'll put together a plan and a number with you.

      Get a plan built around your company

      Tell us your team size and how you operate today, and we'll walk you through Mitqor and what it would cost for your company.

      • Every core feature included in one plan — jobs, payroll, invoicing, inventory and more
      • Scales from a single office to multiple locations
      • We help set up your company, offices and team
      See plans and prices Get a custom quote
      Questions

      What people usually ask before switching

      If something's not covered here, ask us directly when you request a demo.

      How long does setup actually take?

      Most companies are running on Mitqor within a few days, not weeks. We load in your company details, offices, employees and any jobs you're currently tracking, print your crew's time-clock QR codes, and you're ready to use it on the next job. There's no big "implementation project" - if you can run a job the way you run it today, you can run it in Mitqor.

      Do my workers need to download an app or learn new software?

      No app download for crew members. Time clock is a QR code scan from any phone's camera - it opens straight to a clock-in screen. Photo uploads work the same way, straight from the phone's browser. The learning curve is basically "point your camera at the sign."

      What happens to our data if we ever stop using Mitqor?

      Your data is yours. We can export your jobs, invoices, employee records and job photos at any time, in standard formats (CSV/PDF) you can hand to another system or keep for your own records. You're never locked in.

      Can it handle more than one office or region?

      Yes. Add a location (office/branch) and Mitqor tags jobs, staff and inventory by location automatically, with a filter to view one office or everything at once. Your dashboard, payroll and balance sheet stay combined across every location - one true picture of the whole company, even if it's running out of two cities.

      Can I track my vehicles with GPS, not just assign them?

      Yes - as an optional add-on. Every Mitqor plan lets you assign a vehicle (plate, VIN, make, model) to an employee's profile at no extra cost. The fleet tracking add-on goes further: GPS trip tracking matched against scheduled jobs, a live map of your fleet, and configurable cost-allocation rules for shared vehicles. It's priced separately from your core plan - ask about it when you request a demo.

      What does my client see in the client portal?

      Only their own job. They sign in with a link emailed to them - no password to remember - and see the job's status, the photos you've chosen to share, and their estimates and invoices, with Accept and Decline buttons on anything you've sent. They never see your costs, your crew, your profit or another client's job, and you can switch their access off in one click. Clients who prefer the phone can still accept an estimate by calling you; you mark it accepted yourself and the job is created either way.

      Can I prove my crew was trained on safety procedures?

      Yes. Upload a training document or safety procedure, assign it to specific people or a whole role, and each worker records an acknowledgment once they've reviewed it. Every assignment and sign-off is timestamped and searchable, so the proof is already on file instead of buried in email. You can see at a glance who is still pending.

      Do I need a job before I can send an estimate?

      No. You can build a line-item estimate first and send it to the client. When they accept - by phone, by the link in your email, or in their portal - the job is created automatically and your manager fills in the crew and schedule. You can also start from a job and add the estimate there; Mitqor supports both ways of working.

      Can Mitqor handle emergency restoration work, like floods and fires?

      Yes, as an optional add-on, available on request. Emergency jobs get their own space: intake, a response timeline, equipment charged by the day, a drying log and insurance details. Closing the emergency drafts the invoice and produces a report you can hand to the insurance adjuster. Any crew member can clock in to an active emergency from their phone, even without being assigned first.

      Does it work with Xactimate?

      Mitqor doesn't replace Xactimate. You keep writing your estimate there, and Mitqor produces the documentation to attach with it: the response timeline, drying log, equipment records and photos.

      How is this different from generic project management software?

      Most project management tools are built for software teams or general business use, then bent into shape for construction. Mitqor was built the other way around - inside a real construction company, for the way construction actually runs: a crew time clock that works from a job site with bad reception, materials tracked per job, closeout reports with photos, and payroll rules that match real overtime law - not a generic task board with construction-themed icons.

      What does it cost?

      Pricing is sized to your company - offices, crew size and what you need on day one all factor in. There's no per-module upsell; every feature is included. Request a demo and we'll walk through your specific numbers with you.

      Is our data secure?

      Yes. Every company's data is fully separated from every other company's - nobody outside your company can see your jobs, employees or numbers. Admin accounts support two-step verification, sessions can auto sign-out after inactivity, and every change is recorded in an activity log so you always know who did what and when.

      Can I try it before committing to anything?

      Yes - request a demo below and we'll walk you through Mitqor running on a real job, no credit card and no commitment. You'll see the actual product, not a slideshow.

      See Mitqor running on a real job

      Tell us a bit about your company. We'll reach out to set up a short walkthrough — no pressure, no obligation.

      • A real walkthrough, not a canned demo video
      • We'll answer questions specific to how you run jobs
      • No credit card, no commitment